Did you try " Clear Counters" ?
----- Original Message -----
From: "Pete Ruttman (adminpr)" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, May 30, 2000 2:50 PM
Subject: Re: PIX Firewall show connection counters
> >Is there any commands to clear the counters on a PIX ?
> >I amtrying to reset to 0 the numbers displayed by
> >"show connections".
> >
> >It seems, the only way is a F/W reboot, to clear the
> >`show connections` counters in order to monitor max
> >number of TCP/IP connection through the PIX
> >
> My gut reaction is that isn't possible since the show connections is
totaling the current xlate connections the PIX is doing. You can use clear
xlate to clear out the xlate connections but then of course you are knocking
people off so you might as well reboot.
>
> pete
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
