So can I use the command
interface serial 1
ip unnumbered serial 0
Anil
so as to assifgn same ip address to the two serial interfaces.
On Tue, 6 Jun 2000, ALI SHEERAZ wrote:
>
> The "ip unnumbered" configuration command allows you to enable IP processing
> on a serial interface without assigning it an explicit IP address. This is a
> good way to conserve network and address space.
>
> Consider a class B network subnetted with eight bits. Every interface in the
> network including the serial lines will require a subnet. Since each serial
> line has only two nodes, this wastes 252 addresses on each serial line.
> Here's where IP unnumbered comes in handy. For any point-to-point serial
> link or point-to-point sub- interface, IP unnumbered lets you borrow the
> address of some LAN interface to use as a source address for routing updates
> and packets from that interface. No network is wasted, and precious address
> space is conserved.
>
> IP Unnumbered is used for point-to-point links.
>
>
> Command Syntax
> ---------------
>
> interface Ethernet0
> ip address 171.68.178.196 255.255.255.192
> interface Serial1 ip unnumbered Ethernet0
>
> router igrp 10 network 171.68.0.0
>
>
> >Hi fellows
> >could anybody explain to me what "ip unnumbered" command is, and how it is
> >used?
> >thanks in advance.
>
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
