No, packets that don't belong to the same subet will be routed out.
-Apoorva
Mahesh Gupta wrote:
> Will the broadcast packets cross the router in this case ??
> ....as router is a part of the same subnet which is available across a point
> to point serially connected networks.....
>
> Mahesh
>
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> > Justin Marcus
> > Sent: Wednesday, June 07, 2000 4:41 PM
> > To: ALI SHEERAZ
> > Cc: [EMAIL PROTECTED]
> > Subject: Re: ip unnumbered
> >
> >
> > if your ethernet0 is 10.0.0.1
> > and you make your serial0 have that unnumbered thingy
> > so both your serial and ethernet have 10.0.0.1 does that mean
> > the remote site your connecting to will have to have an address like
> > 10.0.0.2 so its in the same network as your serial0 ?
> >
> > thanks :)
> >
> >
> > On Tue, 6 Jun 2000, ALI SHEERAZ wrote:
> >
> > >
> > > The "ip unnumbered" configuration command allows you to enable
> > IP processing
> > > on a serial interface without assigning it an explicit IP
> > address. This is a
> > > good way to conserve network and address space.
> > >
> > > Consider a class B network subnetted with eight bits. Every
> > interface in the
> > > network including the serial lines will require a subnet. Since
> > each serial
> > > line has only two nodes, this wastes 252 addresses on each serial line.
> > > Here's where IP unnumbered comes in handy. For any
> > point-to-point serial
> > > link or point-to-point sub- interface, IP unnumbered lets you
> > borrow the
> > > address of some LAN interface to use as a source address for
> > routing updates
> > > and packets from that interface. No network is wasted, and
> > precious address
> > > space is conserved.
> > >
> > > IP Unnumbered is used for point-to-point links.
> > >
> > >
> > > Command Syntax
> > > ---------------
> > >
> > > interface Ethernet0
> > > ip address 171.68.178.196 255.255.255.192
> > > interface Serial1 ip unnumbered Ethernet0
> > >
> > > router igrp 10 network 171.68.0.0
> > >
> > >
> > > >Hi fellows
> > > >could anybody explain to me what "ip unnumbered" command is,
> > and how it is
> > > >used?
> > > >thanks in advance.
> > >
> > > ________________________________________________________________________
> > > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
> > >
> > > ___________________________________
> > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> >
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
