With a partial mesh and -all subinterfaces, you should use splithorizon and
is enabled by default. The router treats each subinterface and a separate
logical interface. Therefore, you should leave split-h at it's default
here. If you are using all physical interfaces - in the same subnet, then
you should disable split-h. It's actually spelled out very well in Caslow's
book of when you should and shouldn't disable split-H.
Kenny
----- Original Message -----
From: "Scott Livingston" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, June 06, 2000 10:15 AM
Subject: [Fwd: Morning]
> can someone help out here please? THANKS!
> subject:
> Morning
> Date:
> Tue, 06 Jun 2000 07:50:00 -0500
> From:
> Scott Livinston <[EMAIL PROTECTED]>
> To:
> [EMAIL PROTECTED], Jon Helmer <[EMAIL PROTECTED]>
>
>
>
>
>
> This is reference to Mr. David Wosefer's white paper about Frame Relay..
>
> David,
>
> We are currently running a small F.R. network over here and something
> you wrote contradicted what we currently have in operation.. Currently
> we have a hub and spoke topology, 3 spokes to be exact... we are an IP,
> partial meshed network running subinterfaces and EIGRP.. You mentioned
> in your paper that you need to turn off ip split-horizon on the
> subinterfaces if the spokes are to know about the other spokes
> networks.. Well in our case we don't have ip split horizons turned off
> and the spokes know about all other spokes... How could this be? I had
> my lead engineer look @ this and we both cant figure out this
> discrepancy between what you published and what we are currently running
>
> over here... If you get some time could you please show me where i might
>
> be lost? Thanks for your help!
>
> --------------------------------------------------
> Scott M. Livingston
> Network Engineer (CCNP)
> 12851 Foster
> Overland Park, KS 66213
> 800.888.7535
> 913.402.7844 x1056
> 913.814.7849 Fax
>
> "Make every swing as if it were your last"
> -Gary Schroer
> --------------------------------------------------
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
