You maybe in a loop- try a shut and then a no shut on the interface,
kinda like reset the interface-
William Wong wrote:
>
> Help me guys
>
> Interface Ethenet0 on cisco 2503 router problem!
>
> Physical connection:-
>
> AUI port ---------> Transceiver -----------------> Hub
>
> I use Hyperterminal to logon into the router.
>
> It keep showing that the line protocol for interface ethernet0 change state
> to up and change state to down and I cannot ping the router.
>
> I have:-
> Changed the router
> Changed the transceiver and all the cables
> But still the same.
>
> What is the possibility now????
>
> Thanks!
>
> William
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]