Sorry guys
Problem solved.
I have tested 3 transceivers but unfortunately that 3 are the faulty
transceiver.
Now is working fine. I bought a new one.
Bad luck ha!
William Wong Kun Sing
IS Executive, Enterprise Services Organisation
Solsis (M) Sdn. Bhd.
MCP, MCP+I, MCSE, Cisco CCNA
> -----Original Message-----
> From: Erick [SMTP:[EMAIL PROTECTED]]
> Sent: 07 June 2000 13:17
> To: William Wong; [EMAIL PROTECTED]
> Subject: Re: Help! What happen??? URGENT!
>
>
> Have you tried a different port in the hub, tried
> another hub, or took your PC/laptop and plugged it
> into router with crossover to see if interface stays
> up? Was this working fine and just started being a
> problem?
>
> - Erick
>
> --- William Wong <[EMAIL PROTECTED]>
> wrote:
> > Help me guys
> >
> > Interface Ethenet0 on cisco 2503 router problem!
> >
> > Physical connection:-
> >
> > AUI port ---------> Transceiver ----------------->
> > Hub
> >
> > I use Hyperterminal to logon into the router.
> >
> > It keep showing that the line protocol for interface
> > ethernet0 change state
> > to up and change state to down and I cannot ping the
> > router.
> >
> > I have:-
> > Changed the router
> > Changed the transceiver and all the cables
> > But still the same.
> >
> > What is the possibility now????
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Photos -- now, 100 FREE prints!
> http://photos.yahoo.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]