I have new 2520 router with 11.2 IOS. I want to configure ISDN BRI0 for regular internet access. I have 40 computers which will browse internet through router. Please help me in step by step configuration. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Ole Drews Jensen Sent: Friday, June 09, 2000 12:18 AM To: '[EMAIL PROTECTED]' Subject: ISDN Switch Type I am trying to troubleshoot a slow WAN request time between a remote branch office and my network, and I can see that the switch type is set to 5ESS on the remote router (which I am looking at with telnet). On all my routers here, and at another remote office, the switch types are all NI-1. The question is - would the router be able to communicate at all with a switch type set to 5ESS the switch really is an NI-1? If I assume that it would be able to communicate, I could change it remotely from 5ESS to NI-1 to see if it should help the slow request time, and then change it back again if not. If I assume that it would not be able to communicate, I would loose my feature of communicating with it remotely when changing from 5ESS to NI-1, and the office would be completely down until I could get someone to move a pc over by their router and connect it with a console cable and change it back. Any comments are appreciated, Ole ~~~~~~~~~~~~~~~~~~~~~~~~~ Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] ~~~~~~~~~~~~~~~~~~~~~~~~~ ___________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
