Your router between the networks need to be able to support or function as a relay agent. It must be able to pass DHCP/Bootp messages from one subnet to the other. -----Original Message----- From: Joe Quezada [mailto:[EMAIL PROTECTED]] Sent: Friday, June 09, 2000 8:22 AM To: 'Dave Santeramo'; [EMAIL PROTECTED] Subject: RE: DHCP with two networks You need to use the "ip helper-address" interface command on your router. On the ethernet interface that does not have a DHCP server on it, use the #ip helper-address <DHCP IP Address> . On the DHCP server, add another scope with your other network addresses. Hope this helps. Joe Quezada -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Dave Santeramo Sent: Friday, June 09, 2000 8:03 AM To: [EMAIL PROTECTED] Subject: OT: DHCP with two networks I have two networks and need to have DHCP enabled for both of them. Currently, I only have DHCP on the downstairs network. How do I add the other network to the DHCP server? Also, I have only one server. thanks ___________________________________________________________________ To get your own FREE ZDNet Onebox - FREE voicemail, email, and fax, all in one place - sign up today at http://www.zdnetonebox.com ___________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
