Thanks!! :)
That did it. It just taked a little bit of pressing the 6 several times. I checked
it, and it does stop domain lookups too.
Larry
Thomas Trygar wrote:
> <CTRL> <SHIFT> <6> (without X) will work, you just have to keep press buttons
> until it stops process. I don't know if it works for domain lookups though.
>
> Lawrence Dwyer wrote:
>
> > well, when I came in today, it had luckily stopped pinging, last night I had
> > set up an interface to return the pings so it would go much much faster, guess
> > it blazed through . This morning I have set up a test. Reeverse telnetting in,
> > started pinging, there is no way to log out of the router, can't type
> > anything. Ctr Shft 6 x gives you the main async server box. From there I disc
> > sessions, cleared lines, tried it several different ways. Everytime I got back
> > in the router, it was trying to ping. I would probably have to have telnet
> > setup in the router instead of reversing in, to give me a different line
> > allowing me to reload.
> > Larry
> >
> > Ryan Moffett wrote:
> >
> > > I would imagine logging out of the router would do the same....ping is run
> > > in exec mode...
> > >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> > > Albert Ip
> > > Sent: Thursday, June 08, 2000 10:27 PM
> > > To: 'Lawrence Dwyer'; 'Groupstudy'
> > > Subject: RE: Stopping Ping
> > >
> > > You got the answer there.
> > > "Ctr Shft 6" same time, than "x"
> > >
> > > Albert
> > >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> > > Lawrence Dwyer
> > > Sent: Thursday, June 08, 2000 6:27 PM
> > > To: Groupstudy
> > > Subject: Stopping Ping
> > >
> > > Is there any way to stop a long ping on a router?
> > > I set a hundred packets or more some times to get to other routers and
> > > see what I am getting, but if I wish to terminate a routers pining
> > > before the number I set is finished, is there a way? Ctr Shft 6 x,
> > > break, pause, etc etc I havne't found the magic keys yet.
> > > Larry
> > >
> > > --
> > > Lawrence Dwyer, MCSE CCNA
> > > Sherikon, Inc
> > > 301-619-7946
> > >
> > > ___________________________________
> > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >
> > > ___________________________________
> > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >
> > > ___________________________________
> > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > > ---
> >
> > --
> > Lawrence Dwyer, MCSE CCNA
> > Project Officer
> > Telemedicine Advanced
> > Technology Research Center
> >
> > (301) 619-7946
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
--
Lawrence Dwyer, MCSE CCNA
Project Officer
Telemedicine Advanced
Technology Research Center
(301) 619-7946
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
