The CTRL+Break combo works great in HyperTerm.
Thanks!
Mike W.
"pedro quezada" <[EMAIL PROTECTED]> wrote in message
8huq6n$2uq$[EMAIL PROTECTED]">news:8huq6n$2uq$[EMAIL PROTECTED]...
> it works for me i use ctrl + the break key
>
>
> "Michael L. Williams" <[EMAIL PROTECTED]> wrote in message
> 8hsj5k$9l0$[EMAIL PROTECTED]">news:8hsj5k$9l0$[EMAIL PROTECTED]...
> > Hey all. I have my serial connection connected to con0 on my 2502 and
> 2513
> > (token ring .... ewwww... but free) routers.
> >
> > At first I couldn't get past the enable password (secret password), so I
> > tried the "power cycle" then the CTRL-SHIFT-6 B to break the router to
get
> > to the ">" prompt. No dice. ( I eventually got the password from the
> > person I got the routers from.)
> >
> > I'm using Windows 98 and HyperTerminal in VT100 mode. Any guesses why
the
> > CTRL-SHIFT-6 B doesn't send the proper break signal?
> >
> > TIA,
> >
> > Mike W.
> >
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > ---
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
