If you have the following Frame Relay setup in a lab, how would you configure the routers due to the multiple switches. +------+S3 +------+S1/2 +------+S1/0 +------+ | 4000 | | 3640 | |3640-1| | 2600 | | |--------| F/R |--------| F/R |--------| | | | |Swtchng |Swtchng | | +------+ S1/3+------+ S1/1+------+ S0/0+------+ I tackled this as simple frame relay switching between the 4000 S3 Int, and the 3640-1 S1/1 Int. Everything works, and I can ping back and forth. However, I can't seem to figure out how to extend the frame-relay DLCI configs so that I can now get to the 2600 S0/0 Int. I actually tried the reverse, and setup frame-relay switching between the 2600 S0/0 Int, and the 3640 S1/2 Int and everything works. However, same problem, I can't go any further to the S3 Int on the 4000. Would you use the CONNECT command on one of the frame-relay switches? Thanks Much Kamoto ___________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
