Rudi,
Is your hyperterminal set to 9600 baud? The serial port from your pc to the
router is it the same that one that hyperterminal think it is? When you say
they don't accept any input do you mean you hit carriage return and the
router doesn't respond? Verify the above and let us know, don't worry about
the extra post we all started exactly where you are bud!
Zack-CCNA, CCIE Candidate
On Wed, 14 Jun 2000 14:51:41 +1000, BIKEMAN wrote:
> My apologies for those who have seen this a few times... I haven't had
much luck getting it posted so though I'd try it one last time. No more
after this. Promise.
>
> Hi all
>
> I have two 2nd hand 2501's that are giving me a few headaches - when I
plug the console cable into the console port I can see the output but the
routers don't seem to accept any input. The cable and laptop are fine since
I use the combination on a number of other routers without any problems.
>
> Any ideas ?
>
> Thanks
>
> Rudi
CCIE IN Y2G
_______________________________________________________
Get 100% FREE Internet Access powered by Excite
Visit http://freelane.excite.com/freeisp
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
