Hi Folks,
My ISDN configuration (using an ISDN simulator) does not work for some
reason. Can anyone please give a sanity check to my configurations below and
point out where I am fumbling. I am trying to make an ISDN configuration
using PAP and different passwords at both ends to work. Also, only RouterA
should be able to dial-out to RouterB. When I do a "debug ppp auth" and
"debug ppp neg", I see an authentication failure message. Can anyone please
spot the problem with my configuration ? I have tried to scan the whole
documentation CD but to no avail. Thanks.
Aziz
RouterA#
Isdn switch-type basic-dms100
Username RouterB password cisco2
Int bri 0
Ip address 10.1.1.1 255.255.255.0
Encap ppp
Ppp authentication pap
Dialer map ip 10.1.1.2 name RouterB broadcast 2220001
Isdn spid1 111000100 1110001
Isdn spid2 111000200 1110002
Dialer-group 1
Ppp pap sent-username RouterA password cisco1
!
dialer-list 1 protocol ip permit
RouterB#
Isdn switch-type basic-dms100
Username RouterA password cisco1
Int bri 0
Ip address 10.1.1.2 255.255.255.0
Encap ppp
Ppp authentication pap
Dialer map ip 10.1.1.1 name RouterA broadcast
Isdn spid1 222000100 2220001
Isdn spid2 222000200 2220002
Dialer-group 1
Ppp pap sent-username RouterB password cisco2
!
dialer-list 1 protocol ip permit
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
