Hi Group, I have a Cisco 4700 with E1/PRI card and an IGX Switch with FR blade on it. Can I connect the E1 card to the FR blade on the IGX Switch using a cross over cable ? What are the pins that are needed for it to work. Both the 4700 and the ISG FR blade has DB15 Female connector. On the 4700 CE1 end there are 6 pins. Pins Signal 9 Tx Tip 2 Tx Ring 10 Tx Shield 8 Rx Tip 15 Rx Ring 7 Rx Shield I am not sure on the IGX end but I can find out. Any help is much apreciated. Rgds Lye ___________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
