Greetings:
I need to configure a multichannel E1 8 port adapter on cisco7513,is
the following correct?
controller E1 1/0/3
framing no-crc4
linecode hdb3
clocksource line
channel-group 0 timeslots 1-31
!
interface serial1/0/3:0
description to BIEJIE r-7507-bj
ip address 202.98.208.133 255.255.255.252
bandwidth 2048
Must I use the "controller E1" command?Can I use "interface serial10/3"
directly ?
thanks
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
