Try
www.cisco.com/go/cim
Cioa
Luke
-----Original Message-----
From: Paulo Roque [mailto:[EMAIL PROTECTED]]
Sent: Friday, June 16, 2000 2:26 PM
To: [EMAIL PROTECTED]
Subject: Re: ISDN/Frame Relay simulation
derek lewinson wrote:
> 1) How can I simulate ISDN without using a real ISDN line (I don't have
> one)?
There are some box that simulate a ISDN network. I saw this sometime
ago in www.blackbox.com.br (in portuguese). But I think that there is a
english version site.
> 2) How can I simulate frame relay? Do I need a particular type of router,
> FR switch?
You can use your router as a FR Switch. To enable FR switching use:
!
frame-relay switching
!
And you must do a FR route using the command below in interface config
mode.
!
frame-relay route <in-dlci> <out-interface> <out-dlci>
!
There are some examples in:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios112/112cg_cr/4cbook/4cfrelay.htm
.
--
[EMAIL PROTECTED]
Engenheiro de Redes.
CREA/MG 66089/D
ICQ# 6372 3382
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
