Here's my opinion;
An NNI (Network to Network Interface ) is being used to interconnect 2
different frame-relay networks on a PVC basis. This way a dlci on one
network can be pointed to a dlci on another network ( with the NNI in
between the 2 telco's ).
You normally thus don't need to configure it as an NNI, unless you need
traffic to be transmitted from one frame provider to another...
Barry
"M Z" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Usually if a router is at a customers site, it is set as a DTE, the
carrier
> is set as a DCE (provide clock), when do you want to set the router as an
> NNI?
>
> Thanks
>
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
