you need to specify either point t point of point to multipoint. Use the ?
at the end of the command for moe information
Andrew Larkins
BCom, CCNA
Usko Communications
Tel: +2711 800-9300
Fax: +2711 800-9495/6/7/8/9
Cell: +2783-656-7214
Email: [EMAIL PROTECTED]
OR [EMAIL PROTECTED]
“This message may contain information which is confidential and subject to
legal privilege. If you are not the intended recipient, you may not peruse,
use, disseminate, distribute or copy this message. If you have received
this message in error, please notify the sender immediately by email,
facsimile or telephone and return and/or destroy the original message.”
-----Original Message-----
From: Omer Shommo [mailto:[EMAIL PROTECTED]]
Sent: 12 June 2000 00:27
To: Cisco Group Study
Subject: Could not create subinterfaces
Hello,
I tried to create a subinterface on s0 but i could not. Can any body tell me
why?
Thanks
Omer
3102(config)#int s0.1
% Incomplete command.
3102#sh ru
Building configuration...
Current configuration:
!
version 11.3
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname 3102
_____________________________________________
NetZero - Defenders of the Free World
Click here for FREE Internet Access and Email
http://www.netzero.net/download/index.html
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
