Brad,
I have done this countless times and ways. even to the point of removing my
flash card and rebooting. I did find that without a flash card there was no
WAN port.
My Flash card says ip/async on it, so I am wondering if that might be the
problem. Both C1005's while differing in IOS versions, say that.
I thought that I saw one time in boot up an option for "in use" of that
port, and that it gave me the choice between async and sync. But for the
life I me I cannot seem to get to that point.
I see no option for this in any of the docs, and setup just says serial0
setup info for sync and for async, but not saying how one gets one or the
other.
I am at my wits end. Both versions of my IOS for flashing end with a T or
T1.
Any more ideas would be GREATLY appreciated.
Thanks,
Steve
""Brad Ellis"" <[EMAIL PROTECTED]> wrote in message
8if175$f14$[EMAIL PROTECTED]">news:8if175$f14$[EMAIL PROTECTED]...
> I thought the serial ports usually default to sync on a 1005...I could be
> wrong. Try erasing the config, and rebooting the router. ie:
>
> write erase
> reload
> n
>
> -brad
> ""SteveS"" <[EMAIL PROTECTED]> wrote in message
> 8icjvg$j1g$[EMAIL PROTECTED]">news:8icjvg$j1g$[EMAIL PROTECTED]...
> > I need to have a serial port on my Cisco C1005 for CCNA programming. I
> have
> > a crossover DCE/DTE cable.
> >
> > My "serial" port always comes up as async 1. How can or where do I
change
> > this.
> >
> > I cannot find this in the docs, and the docs make mention of both, but
not
> > how to change it.
> >
> > Thanks, Steve
> >
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > ---
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
