The "DCE" that is referenced in setting up a router to use as a frame relay
switch is different than the physical layer DCE reference that requires that
a clock rate be defined.
Connie
-----Original Message-----
From: Nigel Taylor [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 14, 2000 6:47 PM
To: [EMAIL PROTECTED]; M Z
Cc: Bryant Andrews
Subject: Re: Frame Relay switch
Taking into account that the router you have does meet all the requirements
for a FR switch all that is really needed is the command;
Frame_switch(config)#frame-relay switching
since your frame switch is normally considered the DCE you'll also want to
enable you clock rate on the connecting serial interfaces. As well you could
use the following interface commands.
Frame_switch(config-if)#encapsulation frame-relay
Frame_switch(config-if)#clock rate 64000
Frame_switch(config-if)#frame-relay intf-type dce
these are some of you basic commands for the frame switch.
My $0.02
HTH
Nigel
----- Original Message -----
From: M Z <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, June 15, 2000 4:14 AM
Subject: Frame Relay switch
> Would anyone kindly share how to config a Cisco router to act as a FR
> switch.
>
> Thanks in advance.
>
> Mz
>
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
