Set a speed. "speed 38400". Also configure "transport input all" . You can
also try configuring the exact modem type rather then auto/discovery
EF
-----Original Message-----
From: Tan Choh Koon [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 27, 2000 11:57 PM
To: [EMAIL PROTECTED]
Subject: AUX - Dial up
Hi,
I had connected the US Robotic Sportster modem to the 1720 Aux port, but
router cannot detect the modem. I had used correct cable as what manual
shown.
What I am not aware off ?
line con 0
transport input none
line aux 0
autobaud
modem InOut
modem autoconfigure discovery
stopbits 1
flowcontrol hardware
line vty 0 4
Debug confmodem :
0:03:59: TTY5: detection speed (115200) response ------
00:04:05: TTY5: detection speed (57600) response ------
00:04:10: TTY5: detection speed (38400) response ------
00:04:15: TTY5: detection speed (19200) response ------
00:04:21: TTY5: detection speed (9600) response ------
00:04:26: TTY5: detection speed (2400) response ------
00:04:32: TTY5: detection speed (1200) response ------
00:04:37: TTY5: detection speed (300) response ------
00:04:37: TTY5: No modem found
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
