There are certain dip switch settings required on the USR. I can't remember
them but they can be found on CCO.
Kenny
----- Original Message -----
From: "Feliz, Edgar" <[EMAIL PROTECTED]>
To: "Tan Choh Koon" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Tuesday, June 27, 2000 9:30 PM
Subject: RE: AUX - Dial up
> Set a speed. "speed 38400". Also configure "transport input all" . You can
> also try configuring the exact modem type rather then auto/discovery
>
> EF
>
> -----Original Message-----
> From: Tan Choh Koon [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, June 27, 2000 11:57 PM
> To: [EMAIL PROTECTED]
> Subject: AUX - Dial up
>
>
> Hi,
>
> I had connected the US Robotic Sportster modem to the 1720 Aux port, but
> router cannot detect the modem. I had used correct cable as what manual
> shown.
> What I am not aware off ?
>
>
>
> line con 0
> transport input none
> line aux 0
> autobaud
> modem InOut
> modem autoconfigure discovery
> stopbits 1
> flowcontrol hardware
> line vty 0 4
>
> Debug confmodem :
> 0:03:59: TTY5: detection speed (115200) response ------
> 00:04:05: TTY5: detection speed (57600) response ------
> 00:04:10: TTY5: detection speed (38400) response ------
> 00:04:15: TTY5: detection speed (19200) response ------
> 00:04:21: TTY5: detection speed (9600) response ------
> 00:04:26: TTY5: detection speed (2400) response ------
> 00:04:32: TTY5: detection speed (1200) response ------
> 00:04:37: TTY5: detection speed (300) response ------
> 00:04:37: TTY5: No modem found
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
