There is no such command "speed 200" - you can get
200Mb if you specify
full-duplex
speed 100
assuming your hub/switch supports 100 full-duplex
RGRDS,
Evgeny
""JEK"" <[EMAIL PROTECTED]> wrote in message
8jc0u9$mrd$[EMAIL PROTECTED]">news:8jc0u9$mrd$[EMAIL PROTECTED]...
> Collin,
>
> Is this a FastEth0 Interface or a Eth0 Interface.....If your using one
> of the
> onboard Ethernet Interfaces they are 10Mb half-duplex and 20Mb
> full-duplex....
> So this is actually depending on what your using......You can either use
the
> following
>
> speed 10
> speed 20
> speed 100 fas eth
> speed 200 fas eth
>
> duplex full
> duplex half
>
> Joe
> Senior Network/Systems Engineer
> CCNA
>
> Luan Kim <[EMAIL PROTECTED]> wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > collin,
> > try this:
> >
> > conf t
> > int e0
> > speed 10
> > end
> >
> >
> > ********************************************
> > Luan T. Kim, MCSE, CCNA *
> > Systems/Network Infrastructure Engineer *
> > MP3.COM, INC. http://www.mp3.com *
> > Phone: 858-623-7341 Cell: 858-382-3055 *
> > Fax: 858-623-7400 Email: [EMAIL PROTECTED] *
> > ********************************************
> >
> >
> > On Wed, 21 Jun 2000, Collin Clark wrote:
> >
> > > Is there a way to change E0 on a 2600 router from 100Mbs to 10Mbs?
> > >
> > >
> > > ___________________________________
> > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > ---
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
