My guess is that it's because "no ip directed-broadcast" is the default on
each interface in 12.0. that's just a guess, I haven't had any coffee yet
so no actual thought is taking place. :-)
John Neiberger
>
> I had three sites in a hub and spoke configuration. Lets say router A was
> the hub router and there were two spokes router B and router C. All were
> 2500 series routers ( 2501 ) running IOS 11.2 ip plus i think . There was
no
> complex configuration; simple static routes and everything was working
fine.
> The NT stations at each site were able to log on to the server placed at
the
> hub and everything was showeing up on the network neighbourhood. This was
so
> because i had defined the required helper addresses.
>
> Then the need arose to add another site and the hub router A was replaced
by
> a cisco 2620. the same configuration was copied with ofcourse a few
> additional static routes here and there and one more ip helper-address
> statement for the new site. The new router was running IOS 12.1(1). The
next
> thing u know that still there is connectivity but when a new machine
boots
> on a remote site it is not able to find a domain controller. I had the
> helper addresses defined properly but still nothing. Even the network
> neighbourhood did not show all the machines; showed only the local
machines.
> Can anyone take a shot at this and guess what was the problem ?
>
>
> Regards
> Atif
>
> P.S : I managed to figure it out after running a debug trace on UDP but
> still i think it was an interesting prob and thought maybe someone could
> give me a better explanation to it.
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_______________________________________________________
Say Bye to Slow Internet!
http://www.home.com/xinbox/signup.html
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]