It depends on the ios you are using. Ver 11.3 used serial 2, ver 12.0 uses it
like a normal s0:0
Lisa Ridley wrote:
> At my company we currently have a couple 3810's running voice over Frame
> Relay with the Cisco 3810's. To go over the WAN we use interface s0:0, but
> since we are using Frame Relay we actually used subinterface s0:0.1.
>
> Hope this helps.
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Hallgren, Michael
> Sent: Monday, July 03, 2000 7:35 AM
> To: '[EMAIL PROTECTED]'
> Subject: MC3810
>
> Hi,
>
> I've got an MC3810 in stock, and I need to hook up a customer G.703 both
> sides (my 7513 the other side).
>
> On my MC3810 I've got an MFT module, so I'd like to run my link over that
> port.
>
> At a glance - and presently w/o having had console on the box - I'd go
>
> controller e1 0
> clock source xxxxx
> mode yyy
>
> etc. Now, what's the interface name under which I may configure IP on the
> WAN side ? (The only other interface I want to use is the Ethernet one, for
> LAN side.)
>
> mh
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
--
E. Carolina Arias Serna
Consorcio Red Uno
Ingenierķa Datos
Sector Servicios
[EMAIL PROTECTED]
56244400 E4828
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]