Take a look at the command
dialer fast-idle "seconds"
""Tan Choh Koon"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
>
> AT Hub site I had configure one physical BRI to dial to and receive call
> from 3 remotes router. So far it is working well, but I discovered if Hub
> router had initiated call to 2 remote sites, then when there is a traffic
to
> 3rd remote site the router initiated the 3rd call but there is not
available
> channel (2B is occupied ) to call. It should drop the 3nd call till the
> channels is available agains. But weird things is it Disconnected the
First
> called number and allowed the 3rd call ?
>
> How to prevent this ? I dont want to interrupt the previous connection
till
> the idle time is expired, then only the 3nd call traffice can make the
> connection.
>
> Thanks
>
> Choh Koon, Tan
> CCDA,CCNP
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
