don't know 4 sure but the FR technique is a point-to-point or multi point
technique.
For each DLCI it is possible to set another subint en choose the p-t-p or
p-t-m stuff.
Why would you wanna do this with HDLC ???
Ruud
-----Oorspronkelijk bericht-----
Van: Omer [mailto:[EMAIL PROTECTED]]
Verzonden: woensdag 5 juli 2000 9:40
Aan: Cisco Group Study
Onderwerp: point-to-point or multipoint subinterfaces
Hello,
I have a router with tow serial ports. I have noticed that one of my serial
interfaces, which is configured with HDLC
encap, does not give me the option to choose
between point-to-point or multipoint subinterfaces. The other serial
interface, with frame-relay encap, allows me to do so.
Does this have
something to do with the type of encapsulation on each serial port ? If that
is true, can some one please elaborate?
R2#config t
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#int s0.1 ?
<cr>
R2(config)#int s1.1 ?
multipoint Treat as a multipoint link
point-to-point Treat as a point-to-point link
<cr>
interface Serial0
ip address 180.180.2.1 255.255.255.0
ipx network 200
!
interface Serial1
bandwidth 56
ip address 170.170.0.1 255.255.0.0
encapsulation frame-relay
ipx network 2000
clockrate 56000
Thanks
Omer Shommo
____________NetZero Free Internet Access and Email_________
Download Now http://www.netzero.net/download/index.html
Request a CDROM 1-800-333-3633
___________________________________________________________
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
