Hi,
I had Hub site where I would have 2 units of 1720
router, one is for leased line to ISP and another for the ISDN DDR to remote
spokes.
PCs
-------------------------------e0--RouterA-----------------------
ISP
|
|
|_____e0--RouterB--
Bri0---------------- Telco ISDN
The PCs are on the LAN with Network
10.10.30.0/24
e0 on Rotuer A is 10.10.30.1/24
e0 on Router B is 10.10.30.2/24
Router A will configure with NAT to let PCs with
private address to access to Internet
Router B will configure to dial to spokes site
where the networks are 10.10.50.0/24 and 10.10.60.0/24
respectively.
I want my PCs can access to Internet and the
Intranet , so how can I set the Gateway in PCs ???
If the gateway set is 10.10.30.1/24 then it will
not able to communicate with Intranet.
Any suggestion ?
Thanks a lot.
C.K.Tan
|
- Re: 2 routers - 2 gateway Tan Choh Koon
- Re: 2 routers - 2 gateway Priscilla Oppenheimer
- Re: 2 routers - 2 gateway - Thanks Tan Choh Koon
- Re: 2 routers - 2 gateway Pedro Quezada
- Re: 2 routers - 2 gateway Mohamed Abubakkar Siddiqu
- Re: 2 routers - 2 gateway Tan Choh Koon