Hi group
I'm Repeating an FR question,...I have seen the following question raised
by one of the members. I'm interested to know how to connect two
routers back to back over FR... (This option is there in Motorola
Router & I've done it)
If we need to setup a router as a frame relay switch
and connect another
router to it. Will the following configuration
work? Why?
_____________________________________________________________
Router A
-DCE cable is connected
frame-relay switching
!
interface Serial0
no
ip address
encapsulation frame-relay IETF
clockrate 2000000
frame-relay
lmi-type cisco
frame-relay intf-type dce
!
interface Serial 0.1
point-to-point
ip address x.x.x.2 255.255.255.0
frame-relay interface-dlci
102
RouterB -DTE cable is connected
interface Serial
0/4,
no ip address
encapsulation frame-relay IETF
frame-relay lmi-type
cisco
!
interface Serial0/4.1 point-to-point
ip address x.x.x.1
255.255.255.0
frame-relay interface-dlci 102
thank you very
much
_____________________________________________________________
Thanx
Senthil Kumar P.S.
