Do a "sh ver" from the command line in user mode. It should have a line
that says something like system restarted by power on or power reset.
Thanks,
Stan Rossetti
Russia Services Group
Email: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
Phone: (256) 544-5031
Beeper: 544-1183 pin # 0112
<<...>>
-----Original Message-----
From: Soucy, Aaron [SMTP:[EMAIL PROTECTED]]
Sent: Tuesday, July 18, 2000 3:02 PM
To: '[EMAIL PROTECTED]'
Subject: Quick question
Does anyone know if there is a way to tell if a router has been
power
cycled?
Thanks in advance,
Aaron
Aaron Soucy, CCNA
IT Support Analyst
Women's Health Connecticut
22 Waterville Road
Avon, CT 06001
(860) 678-3496
(860) 678-3432 (fax)
[EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines:
http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]