Hi,
Switch off the router, take out the NP-2T, insert the NP-4T (check for the
right cables) and power up the router. Make your config, ready.. :))
Ruud
-----Oorspronkelijk bericht-----
Van: Alex Lee [mailto:[EMAIL PROTECTED]]
Verzonden: donderdag 20 juli 2000 4:04
Aan: [EMAIL PROTECTED]
Onderwerp: Re : Swapping module on a 4500 router
Hello group,
My weekend project is to swap out the NP-2T network processor module on my
4500 rotuer with a NP-4T.
Since I Have not done that before, I downloaded the 'Cisco 4500 Hardware
Installation and Maintenance' manual for my reference.
Would the group be kind enough to offer a 'Best Practice' recommendation on
how to proceed ?
Regards,
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]