There is really nothing to it. Turn the router off, pull the old NP, insert the new one, turn the router on. Make changes to your config as needed since there will be new interface names. On Wed, 19 Jul 2000, Alex Lee wrote: > Hello group, > > My weekend project is to swap out the NP-2T network processor module on my > 4500 rotuer with a NP-4T. > > Since I Have not done that before, I downloaded the 'Cisco 4500 Hardware > Installation and Maintenance' manual for my reference. > > Would the group be kind enough to offer a 'Best Practice' recommendation on > how to proceed ? > > > Regards, > > > > ___________________________________ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > ----------------------------------------------------- Brian Feeny, CCNA [EMAIL PROTECTED] 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881) ___________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]