are you using the riht gateway?
have you forotten to use the network command?
PQ
Jim / Manee Brinksma wrote:
> Hardware & Software
> (1) Cisco 2501 (3) DTE/DCE Cables
> (1) Cisco 2502 (1) NetGear 4 Port 10/100 Switch
> (1) Cisco 2503 (2) Windows 2000 Advanced Servers
> (1) Cisco 2504 (1) Windows 2000 Professional WS
> (2) 10BaseT Ethernet Transceivers (1) Copy HP Openview
> (1) Cisco Console Cable (1) Copy Cisco Config Maker
> (*) Power Cords & Cat5 Cables
>
> Configurations
> NetGear Switch - Port 1 - Server
> Port 2 - Server
> Port 3 - Workstation
> Port 4 - Ethernet Transceiver attached to AUI Interface
> on 2503
>
> Servers and Workstation have static IP Addresses and can see each other no
> problem
>
> If I use the hyperterminal and the console cable to connect to any routers I
> can see all other routers (sh cdp neighbors) and do configurations.
>
> On the AUI interface I configured IP with the appropriate address and subnet
> mask, and set all the vty passwords.
>
> Problems
> I cannot ping or telnet into the router from from the servers or
> workstation.
>
> HP Openview also does not see the routers, but can see the rest of the
> network. I have the Cisco Equipment code for Openview.
>
> Troubleshooting I Did
> I tried using different Ethernet Transceivers
> I tried using different Cat5 Cables (known goods)
> I tried using a different IP address
> I tried using all the other ports on the switch
> I tried a different 10/100 switch (also NetGear)
>
> Config Problem??
>
> Help please. Thank you in advance.
>
> Jim
>
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]