I have a lab set up with three routers connected to a Madge 750 switch and I have been having a similar problem. I have only done a detailed eval with OSPF because I basically have to sit and watch for the failure - lacking a decent syslogger. I have been finding a neighbor/hello loss on one of my RSP7000 machines after about 15 - 20 minutes. I had a similar problem with EIGRP, but switched it over to OSPF to see if I still had the problem before I tested the neighbor links. It is an RSP7000 w/ CX-AIP. I posted it earlier today - 3/24/2003. The only other thing that appears to happen along the way is an SVC reset on the hub router, but that should be transparent. I don't know if this will give you any ideas, but if it does can you give me some feedback on the cure?
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=66102&t=63925 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
