So if I read this right, it is just a different set of commands.  Are there
operational differences?

-----Original Message-----
From: MADMAN [mailto:[EMAIL PROTECTED]
Sent: Thursday, April 03, 2003 3:44 PM
To: DeVoe, Charles (PKI)
Cc: [EMAIL PROTECTED]
Subject: Re: Hybrid vs. Native [7:66766]


DeVoe, Charles (PKI) wrote:
 > We have a 6509 and I have heard talk about native vs. Hybrid mode of
 > operation.  What is the difference?  Is there a link to a white paper or
 > something?
   That question comes up periodically but the in a nutshell a 6500 in 
native mode is a big router, no catOS commands, and if you are familiar 
with 2900/3500 switch commands native switch layer 2 stuff will be 
familiar and of coarse the L3 commands are your regualr old IOS 
commands.  Here is a snap shot of a 6506 running native:

Native6506#sh ha
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-JS-M), Version 12.1(13)E, EARLY 
DEPLOYMEN
T RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Wed 04-Sep-02 18:45 by eaarmas
Image text-base: 0x40008C00, data-base: 0x41A68000

ROM: System Bootstrap, Version 12.1(4r)E, RELEASE SOFTWARE (fc1)
BOOTLDR: c6sup2_rp Software (c6sup2_rp-JS-M), Version 12.1(13)E, EARLY 
DEPLOYMEN
T RELEASE SOFTWARE (fc1)

Native6506 uptime is 5 weeks, 2 days, 43 minutes
Time since Native6506 switched to active is 5 weeks, 2 days, 42 minutes
System returned to ROM by power-on (SP by power-on)
System image file is "slot0:c6sup12-js-mz.121-13.E.bin"

cisco Catalyst 6000 (R7000) processor with 112640K/18432K bytes of memory.
Processor board ID SAD05020HUX
R7000 CPU at 300Mhz, Implementation 39, Rev 2.1, 256KB L2, 1024KB L3 Cache
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
8 Virtual Ethernet/IEEE 802.3  interface(s)
120 FastEthernet/IEEE 802.3 interface(s)
4 Gigabit Ethernet/IEEE 802.3 interface(s)
381K bytes of non-volatile configuration memory.

16384K bytes of Flash internal SIMM (Sector size 512K).
Standby is up
Standby has 112640K/18432K bytes of memory.

Configuration register is 0x2102

Native6506#

Native6506#sh conf
Using 8789 out of 391160 bytes
!
version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Native6506
!
boot system flash slot0:c6sup12-js-mz.121-13.E.bin
boot bootldr bootflash:c6msfc2-boot-mz.121-4.E1
no logging console
enable password cisco
!
ip subnet-zero
!
!
ip tcp intercept mode watch
no ip domain-lookup
!
mls flow ip destination
mls flow ipx destination
!
redundancy
  mode rpr-plus
  main-cpu
   auto-sync running-config
   auto-sync standard
!
!
!
interface Port-channel1
  no ip address
  switchport
  switchport trunk encapsulation dot1q
!
interface GigabitEthernet1/1
  no ip address
  switchport
  switchport trunk encapsulation dot1q
  switchport trunk native vlan 64
!
interface GigabitEthernet1/2
  no ip address
  shutdown
!
interface FastEthernet3/1
  no ip address
  duplex full
  speed 100
  switchport
  switchport access vlan 301
  switchport trunk encapsulation dot1q
  switchport mode trunk
!
interface FastEthernet3/2
  ip address 121.1.1.2 255.255.255.0
  duplex full
  speed 100
!
interface FastEthernet3/3
  ip address 30.1.1.1 255.255.255.0
  ip access-group 199 in
  duplex half
  speed 100
!
interface FastEthernet3/4
  no ip address
  duplex half
  speed 10
  switchport
  switchport access vlan 304
  switchport mode access
!interface Vlan1
  no ip address
  shutdown
!
interface Vlan64
  ip address 172.28.64.23 255.255.255.0
!
interface Vlan302
  ip address 79.79.79.1 255.255.255.0
  ip access-group 199 in
!
interface Vlan303
  ip address 99.13.13.1 255.255.255.0
  shutdown
!
interface Vlan304
  ip address 79.79.80.1 255.255.255.0
!
interface Vlan305
  ip address 99.15.15.1 255.255.255.0
  shutdown
!
interface Vlan306
  no ip address
  shutdown
!
interface Vlan307
  no ip address
!
router eigrp 1
  network 172.28.0.0
  no auto-summary
  eigrp log-neighbor-changes
!
router eigrp 100
  network 99.0.0.0
  no auto-summary
  no eigrp log-neighbor-changes
!
ip classless
no ip http server




-- 
David Madland
CCIE# 2016
Sr. Network Engineer
Qwest Communications
612-664-3367

I would rather have a German division in front of me than a French one 
behind me."
--- General George S. Patton




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66784&t=66766
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to