Hybrid version use two typee of software CAT OS and IOS Cat OS is used on the supervisory Engine (Where you define your vlan, set domain name, and port setting) while IOS is used on the MSFC. MSFC is the card that perform the routing. The native mode used only IOS making the switch look like a router.
I recently did a conversion from Hybrid to Native. Native is much more simpler to use and manage. Here's a link to help you out: www.cisco.com/warp/public/473/81.html Rbx10 CCIE-N-training Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=66892&t=66766 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]