Try changing the baud rate on your serial connection to 115200, this is done within your terminal program, and see if the output is legible. If not, try all the speeds one by one.
-----Original Message----- From: Funnell Giles [mailto:[EMAIL PROTECTED] Sent: Thursday, May 29, 2003 9:19 AM To: [EMAIL PROTECTED] Subject: Password Recovery 3600 [7:69762] Hi all, I have just acquired a 3600 router. There seems to be a problem with the console, whenever I connect, it just produces garbage. I can get into it through the serial connection. However, I don't know the password and the only password recovery techniques I've found is to go in through the console. Does anyone know of another way to either wipe the entire config or recover the password. Many thanks for your help. Giles Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=69773&t=69762 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]