Fellows - I have a senario here, I have a PIX firewall with 3 Interfaces , Inside, Outside and DMZ. Machines on the Inside Interface can access Server on DMZ Zone, no problem, I have to facilitate limited access from DMZ zone Servers to Host on Inside Interface. Let take an example, I have a Server on DMZ zone 10.1.1.1 and i need to alow TCP Port 7000 from this Server to a host on Inside zone whoes IP address is 192.168.20.10 I have a raw configuration in my mind since i dont a PIX with 3 Interfaces in my LAB i can not test it. I know i have put an Access List / NAT to do this. Any config welcome.
thanks -- Curious MCSE, CCNP Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=69877&t=69877 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
