You can use IP forwarding on the router to the DHCP and set the scope on the
clients and server so that it picks up addresses in that scope from dhcp, OR
you can use DHCP on the router to assign addresses to the clients preventing
broadcasts for DHCP across the WAN link.
-----Original Message-----
From: Patrick Stiever [mailto:[EMAIL PROTECTED]]
Sent: Friday, August 04, 2000 2:02 PM
To: '[EMAIL PROTECTED]'
Subject: DHCP Over Wan Link
Ladies and Gents,
This would be the first time trying to set this up, I have a remote
office with a frame-erlay link between them and the corporate site. The dhcp
server is at the corporate site, I would like to it up that the users at the
remote site uses a certain dhcp pool on that server. I have heard you can
set it up so that a certain address pool will only assign address when the
request comes through a certain router(i.e. the remote router). Does this
make any sense or have I been inhaling too many paint fumes again? Any help
would be great, thanks.
Patrick Stiever
Communications Engineer
24 Hour Fitness
(760) 918 4459
[EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
