I am testing Hub-Spoke for OSPF over FR,
I verified the neighbor adjacency,but I couldn't see route 2.2.2.2 and
3.3.3.3 in the routing table,
RouterA#sh ip ospf nei
Neighbor ID Pri State Dead Time Address Interface
3.3.3.3 1 FULL/ - 00:01:41 10.1.1.6
Serial0/0.2
2.2.2.2 1 FULL/ - 00:01:39 10.1.1.2
Serial0/0.1
RouterB#sh ip ospf nei
Neighbor ID Pri State Dead Time Address Interface
1.1.1.1 1 FULL/BDR 00:01:38 10.1.1.1 Serial0/0
RouterC#sh ip ospf nei
Neighbor ID Pri State Dead Time Address Interface
1.1.1.1 1 FULL/BDR 00:01:34 10.1.1.5 Serial0/0
RouterA#sh ip ro
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is not set
1.0.0.0/32 is subnetted, 1 subnets
C 1.1.1.1 is directly connected, Loopback0
10.0.0.0/30 is subnetted, 2 subnets
C 10.1.1.0 is directly connected, Serial0/0.1
C 10.1.1.4 is directly connected, Serial0/0.2
Please help.
Thanks
Catherine
----------------------------------------------------
RouterA
interface Loopback0
ip address 1.1.1.1 255.255.255.255
!
interface Serial0/0
no ip address
encapsulation frame-relay
frame-relay lmi-type ansi
no sh
!
interface Serial0/0.1 point-to-point
ip address 10.1.1.1 255.255.255.252
ip ospf hello-interval 30
frame-relay interface-dlci 101
!
interface Serial0/0.2 point-to-point
ip address 10.1.1.5 255.255.255.252
ip ospf hello-interval 30
frame-relay interface-dlci 102
!
router ospf 1
log-adjacency-changes
network 1.1.1.1 0.0.0.0 area 1
network 10.1.1.0 0.0.0.3 area 0
network 10.1.1.4 0.0.0.3 area 0
RouterB
!
interface Loopback0
ip address 2.2.2.2 255.255.255.255
!
interface Serial0/0
ip address 10.1.1.2 255.255.255.252
encapsulation frame-relay
frame-relay map ip 10.1.1.1 110 broadcast
no frame-relay inverse-arp
frame-relay lmi-type ansi
no sh
!
router ospf 1
log-adjacency-changes
network 2.2.2.2 0.0.0.0 area 2
network 10.1.1.0 0.0.0.3 area 0
neighbor 10.1.1.1
!
RouterC
interface Loopback0
ip address 3.3.3.3 255.255.255.255
!
interface Serial0/0
ip address 10.1.1.6 255.255.255.252
encapsulation frame-relay
frame-relay map ip 10.1.1.5 120 broadcast
no frame-relay inverse-arp
frame-relay lmi-type ansi
no sh
!
router ospf 1
log-adjacency-changes
network 3.3.3.3 0.0.0.0 area 3
network 10.1.1.4 0.0.0.3 area 0
neighbor 10.1.1.5
[GroupStudy removed an attachment of type application/ms-tnef which had a
name of winmail.dat]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70025&t=70025
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
