Hi Tim,
DNWB-008-AS01#show interface gi0/1
GigabitEthernet0/1 is up, line protocol is up
Hardware is Gigabit Ethernet, address is 000b.5f82.2cb1 (bia
000b.5f82.2cb1)
Description: Connected to DHAA-005-DR01 Gi3/4
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex mode, link type is force-up, media type is SX
Scott
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
Tim Champion
Sent: Tuesday, June 10, 2003 6:31 AM
To: [EMAIL PROTECTED]
Subject: Catalyst 3550 [7:70449]
Does anyone know of a command which will show the flavour of GBIC in a
particular slot of a 3550?
Many thanks in advance.
Tim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70450&t=70449
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
