Is that output from a 3550? I know the command is the same on most Cisco gear, but my 3550 doesn't show whether it's SX or LX. It shows everything else, though.
Robert ""Scott Chau"" wrote in message news:[EMAIL PROTECTED] > Hi Tim, > > DNWB-008-AS01#show interface gi0/1 > GigabitEthernet0/1 is up, line protocol is up > Hardware is Gigabit Ethernet, address is 000b.5f82.2cb1 (bia > 000b.5f82.2cb1) > Description: Connected to DHAA-005-DR01 Gi3/4 > MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, > reliability 255/255, txload 1/255, rxload 1/255 > Encapsulation ARPA, loopback not set > Keepalive set (10 sec) > Full-duplex mode, link type is force-up, media type is SX > > Scott > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of > Tim Champion > Sent: Tuesday, June 10, 2003 6:31 AM > To: [EMAIL PROTECTED] > Subject: Catalyst 3550 [7:70449] > > > Does anyone know of a command which will show the flavour of GBIC in a > particular slot of a 3550? > > Many thanks in advance. > > Tim Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70475&t=70449 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
