Lamy Alexandre wrote: > > Hello, You think that it is useful for the CCNP or the CCIE a > router 7505 with:
Uh, yes, you could use a 7505 in your lab for studying for CCNP and CCIE. Consider yourself lucky!? On the other hand, does it only do OC3? That might be hard to use in a lab. What would you connect it to? If you can put that stuff below in English you might get a better answer. ;-) If it also has Ethernet or serial, then you're in good shape. Even if you can't connect anything to the OC3 interface, if you could at least bring it up/up, maybe by turning off keepalives, then you can make it a subnet and route and ping to it, so it becomes useful in a lab. Priscilla > > 1- RSP2, 64Mb RAM, 8 Mb Flash > 1- Vip2-50 (128Mb DIMM SDRAM)+(8 Mb SRAM)Installed:1- > Pa-a3-oc3sml > 1- Feip2-dsw-2tx > 1- Posip-oc3-50-Sm > > flash pcmcia of 32Mo > > IOS: rsp-jk8o3sv-mz.122-15.T2.bin (the last) > > +2 or 3 IOS in bonus > > > if not, I will sell it, A1 condition Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70462&t=70431 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
