comments inline: ----- Original Message ----- From: "Anil Gupte" To: Sent: Tuesday, June 10, 2003 11:46 PM Subject: Simple config issues [7:70482]
> I am trying to configure a 2600 router. I have two problems: > > 1. I issued the default route command > ip route 0.0.0.0 0.0.0.0 x.x.x.x it depends on what x.x.x.x is ? if x.x.x.x is the next hop ip then it will work however if you put any other hop you will not see here. > > I can see this under ip classless in "sh run" > > However, when I do a "sh ip route", it does not appear there and in fact > says: > > Gateway of last resort is not set > > 2. I configured it for RIP using > router rip > network 63.x.x.0 > > and it shows as > 63.0.0.0 > > in "sh run". Is this correct behavior? Until now I had only dealt with > networks in the Class C range. This is a Class C assigned to us but by the > first octet you can see that it is from a Class A range. -that is normal -rip is putting the major net all the time -it is a classful protocol > > Any help or pointers will be muchly appreciated. > > Thanx, > Anil Gupte Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70487&t=70482 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]