Hello,Any Windows expert in this group know how I can use my UP Arrow key on my XP laptop to repeat my previous commands using HyperTerminal?Never had a problem in Win95 or NT but on XP when I use my Up Arrow key, it spits out the output of the cmd. right away and lands a @ sign at the prompt.....Then, I have to use Ctrl-P keys.Thank you.Sincerely. Here is an example using the UP Arrow key: Core#sh int s0/0^@ Serial0/0 is up, line protocol is up Hardware is PowerQUICC Serial Internet address is 10.2.1.1 255.255.255.252 MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, reliability 255/255, txload 251/255, rxload 251/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec) LMI enq sent 93, LMI stat recvd 93, LMI upd recvd 0, DTE LMI up LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 34/0, interface broadcasts 34 Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters 00:15:29 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/3/16 (active/max active/max total) Reserved Conversations 1/1 (allocated/max allocated) Available Bandwidth 5 kilobits/sec 30 second input rate 63000 bits/sec, 24 packets/sec 30 second output rate 63000 bits/sec, 24 packets/secCore#^@ Core#
------------------------------------------------------------------------ MSN 8 with e-mail virus protection service: 2 months FREE* Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70651&t=70651 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]