I agree! My new site is still incomplete an will be launched next week but have a look at http://www.sysdom.org/html/downloads.html
Best regards, Dom Stocqueler -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Scott Nelson Sent: 15 June 2003 17:03 To: [EMAIL PROTECTED] Subject: Re: Slightly OT but help needed nevertheless in HyperT [7:70672] I use Teraterm for my Windowz machines. It's free. http://www.ayera.com/teraterm/ Even does SSH Ver 2. IMHO, a *lot* better than Hypertem. OT: I wonder if Cisco has plans to implement SSH ver 2 client on IOS. Scotty ""Priscilla Oppenheimer"" wrote in message news:[EMAIL PROTECTED] > After tinkering with every single option in HyperTerminal on Windows > XP and > Windows 2000, I have given up on the up arrow. :-) I just use Ctrl-P > which seems to work correctly. > > Of course, another option is different software. SecureCRT is great. > > I hope someone else has better advice, but to be honest, I think > HyperTerminal on newer Windows versions is simply broken in minor ways > and there is no better answer!?! > > Priscilla > > Cisco Nuts wrote: > > > > Hello,Any Windows expert in this group know how I can use my UP > > Arrow key on my XP laptop to repeat my previous commands using > > HyperTerminal?Never > > had a problem in Win95 or NT but on XP when I use my Up Arrow > > key, it > > spits out the output of the cmd. right away and lands a @ sign > > at the > > prompt.....Then, I have to use Ctrl-P keys.Thank you.Sincerely. > > Here is > > an example using the UP Arrow key: Core#sh int > > s0/0^@ > > Serial0/0 is up, line protocol is > > up > > Hardware is PowerQUICC Serial > > Internet address is 10.2.1.1 255.255.255.252 > > MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, > > reliability 255/255, txload 251/255, rxload 251/255 > > Encapsulation FRAME-RELAY, loopback not set > > Keepalive set (10 sec) > > LMI enq sent 93, LMI stat recvd 93, LMI upd recvd 0, DTE LMI up > > LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 > > LMI DLCI 1023 LMI type is CISCO frame relay DTE > > FR SVC disabled, LAPF state down > > Broadcast queue 0/64, broadcasts sent/dropped 34/0, interface > > broadcasts > > 34 > > Last input 00:00:00, output 00:00:00, output hang never > > Last clearing of "show interface" counters 00:15:29 > > Input queue: 0/75/0/0 (size/max/drops/flushes); Total output > > drops: 0 > > Queueing strategy: weighted fair > > Output queue: 0/1000/64/0 (size/max total/threshold/drops) > > Conversations 0/3/16 (active/max active/max total) > > Reserved Conversations 1/1 (allocated/max allocated) > > Available Bandwidth 5 kilobits/sec > > 30 second input rate 63000 bits/sec, 24 packets/sec > > 30 second output rate 63000 bits/sec, 24 packets/secCore#^@ > > Core# > > > > -------------------------------------------------------------------- > > ---- > > > > MSN 8 with e-mail virus protection service: 2 months FREE* Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70673&t=70672 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]