Hi all, I have this problem with this CS-C3550-24PWR-SMI.... Here is what happened: I tried to upgrade this switch to EMI image: c3550-i5q3l2-mz.121-11.EA1.bin. After loading the new EMI image I then issue the command: boot system flash:c3550-i5q3l2-mz.121-11.EA1.bin. When reboot after upgrading, it keep recycling the booting process as shown below:
Loading "flash:c3550-i5q3l2-mz.121-11.EA1.bin"...############################### ############################################################################# ### ############################################################################# ### ############################################################################# ### ############################################################################# ### ############################################################################# # File "flash:c3550-i5q3l2-mz.121-11.EA1.bin" uncompressed and installed, entry po int: 0x3000 executing... Error: hardware not supported by firmware. Try loading newer software instead. System Resetting... Evidently, the switch allowed me to upgrade with this EMI image but not compatible. I have upgraded several of the regular 3550s in the pass without any problem, I think this particular switch with the PWR suffix has something to do with this problem. Any one know how to reverse this mistake or setting this switch to boot with the original IOS which still install in the flash. Any input to resolve this problem is very much appreciated. Thank you all in advance. Xy Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70893&t=70893 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]