Hi *,

am fairly new to cisco products/ commands.

have a problem
got a WS-X6348-RJ-45 module at slot 3 of 6509. In which am unable to get 
DHCP broadcast /address from the main dhcp server.
configured all the ports to respective vlan-x and at the routing module in a 
core switch (6509 with msfc) I hv given the ip helperaddress for this vlan.
rest of the catalyst 4006 switch fetches dhcp frm this scope.

Below is the module capabilities:

Type                     10/100BaseTX
Speed                    auto,10,100
Duplex                   half,full
Trunk encap type         802.1Q,ISL
Trunk mode               on,off,desirable,auto,nonegotiate
Channel                  yes
Broadcast suppression    percentage(0-100)
Flow control             receive-(off,on),send-(off)
Security                 yes
Dot1x                    yes
Membership               static,dynamic
Fast start               yes
QOS scheduling           rx-(1q4t),tx-(2q2t)
CoS rewrite              yes
ToS rewrite              DSCP
UDLD                     yes
Inline power             no
AuxiliaryVlan            1..1000,1025..4094,untagged,dot1p,none
SPAN                     source,destination
COPS port group          3/1-48
Link debounce timer      yes


Module configuration:

set vlan 68   3/1-48
set port auxiliaryvlan 3/1-48 none
set port qos 3/1-48 trust-ext untrusted
set port qos 3/1-48 cos-ext 0
set port enable     3/1-48
set port speed      3/1-48  auto
set port trap       3/1-48  enable
set port name       3/1-48
set port dot1x 3/1-48 port-control force-autho
set port dot1x 3/1-48 multiple-host disable
set port dot1x 3/1-48 re-authentication disabl
set port security 3/1-48 disable age 0 maximum
set port broadcast  3/1-48  100.00%
set port membership 3/1-48  static
set port protocol 3/1-48 ip on
set port protocol 3/1-48 ipx auto
set port protocol 3/1-48 group auto
set port flowcontrol    3/1-48 send off
set port flowcontrol    3/1-48 receive off
set cdp enable   3/1-48
set udld disable 3/1-48
set udld aggressive-mode disable 3/1-48

Cat-OS version:

cat6000-sup.6-3-9.bin



Can you guide me, anything I am missing out.

Thank you

_________________________________________________________________
Get 10mb of inbox space with MSN Hotmail Extra Storage 
http://join.msn.com/?pgmarket=en-sg




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70898&t=70898
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to