you need to enable portfast. Read about portfast. Set spantree portfast enable ( I think this is the syntax I don't have a 6509 in front of me now.)
""Vik Vikky"" wrote in message news:[EMAIL PROTECTED] > Hi *, > > am fairly new to cisco products/ commands. > > have a problem > got a WS-X6348-RJ-45 module at slot 3 of 6509. In which am unable to get > DHCP broadcast /address from the main dhcp server. > configured all the ports to respective vlan-x and at the routing module in a > core switch (6509 with msfc) I hv given the ip helperaddress for this vlan. > rest of the catalyst 4006 switch fetches dhcp frm this scope. > > Below is the module capabilities: > > Type 10/100BaseTX > Speed auto,10,100 > Duplex half,full > Trunk encap type 802.1Q,ISL > Trunk mode on,off,desirable,auto,nonegotiate > Channel yes > Broadcast suppression percentage(0-100) > Flow control receive-(off,on),send-(off) > Security yes > Dot1x yes > Membership static,dynamic > Fast start yes > QOS scheduling rx-(1q4t),tx-(2q2t) > CoS rewrite yes > ToS rewrite DSCP > UDLD yes > Inline power no > AuxiliaryVlan 1..1000,1025..4094,untagged,dot1p,none > SPAN source,destination > COPS port group 3/1-48 > Link debounce timer yes > > > Module configuration: > > set vlan 68 3/1-48 > set port auxiliaryvlan 3/1-48 none > set port qos 3/1-48 trust-ext untrusted > set port qos 3/1-48 cos-ext 0 > set port enable 3/1-48 > set port speed 3/1-48 auto > set port trap 3/1-48 enable > set port name 3/1-48 > set port dot1x 3/1-48 port-control force-autho > set port dot1x 3/1-48 multiple-host disable > set port dot1x 3/1-48 re-authentication disabl > set port security 3/1-48 disable age 0 maximum > set port broadcast 3/1-48 100.00% > set port membership 3/1-48 static > set port protocol 3/1-48 ip on > set port protocol 3/1-48 ipx auto > set port protocol 3/1-48 group auto > set port flowcontrol 3/1-48 send off > set port flowcontrol 3/1-48 receive off > set cdp enable 3/1-48 > set udld disable 3/1-48 > set udld aggressive-mode disable 3/1-48 > > Cat-OS version: > > cat6000-sup.6-3-9.bin > > > > Can you guide me, anything I am missing out. > > Thank you > > _________________________________________________________________ > Get 10mb of inbox space with MSN Hotmail Extra Storage > http://join.msn.com/?pgmarket=en-sg Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70903&t=70898 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
