"Any ideas to what is causing this?" Johan wrong flash image- You need the correct image that supports the hardware we use 1721's with WIC-2T cards in them.
""Johan Bornman"" wrote in message news:[EMAIL PROTECTED] > I have installed a wic2t on a 1720 router. The s0 interface on the wic2t > works fine. The s1 interface does not work(shows serial int up, line > protocol down). It seems to be a problem on the router as I have replaced > the wic2t card with a new card and I have the same problem. The line is > fine. I have tested this by installing a completely different router > (interface up, line protocol up). > > Any ideas to what is causing this? > > Johan Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=71248&t=71053 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]